The service temperature of PE scraper of UPE suction tank cover plate is 100 ~ 110 ℃. It has good cold resistance and can be used at – 269 ℃.
Performance introduction of PE scraper for UPE cover plate of polymer polyethylene water absorption tank panel:
1. The service temperature of PE scraper of UPE suction tank cover plate is 100 ~ 110 ℃. It has good cold resistance and can be used at - 269 ℃. The product with a density of 0.985g/cm3 and a molecular weight of 2 million has a breaking tensile strength of 40MPa, an elongation at break of 350%, a bending elastic modulus of 600MPa, and a continuous impact impact impact of the cantilever notch. Abrasion amount (MPC Method) 20mm.
2. Polymer polyethylene water absorption tank panel UPE cover plate PE scraper in our daily work, the common water absorption panels include vacuum type water absorption panel, coating vacuum panel, polyethylene panel, etc. Among them, the polyethylene water absorption tank panel has physiological circulation and physiological adaptability, and is non corrosive; The vacuum type water absorbing panel has the characteristics of high mechanical strength, small friction coefficient, uniform dehydration, etc., and can greatly improve the service life of the panel and the case net.
